top of page

Group

Public·12 members
Andres Faria
Andres Faria

Achi Ir Pro Sc Software 21


How to Use Achi Ir Pro Sc Software 21 for Infrared Soldering




Infrared soldering is a technique that uses infrared radiation to heat up and melt solder joints on circuit boards. It is especially useful for repairing large and complex boards, such as motherboards, that have many components and connections. Infrared soldering can also solve common problems like "Three Rings of Death" on Xbox-360 consoles.


Download: https://imepxtahi.blogspot.com/?yk=2w3WXM


One of the most popular and versatile infrared soldering stations is the Achi Ir Pro Sc, which can handle chipsets on laptop motherboards, BGA components, and other delicate parts. The Achi Ir Pro Sc has a ceramic upper heater and a ceramic lower heater, both controlled by a microcontroller or a PC synchronization. The station also comes with a software that allows you to set up profiles, monitor temperature, and adjust parameters for different soldering tasks.


In this article, we will show you how to use the Achi Ir Pro Sc software 21, the latest version of the software that supports Windows 10 and has improved features and performance. We will guide you through the installation process, the main functions, and some tips and tricks to get the best results from your infrared soldering station.


How to Install Achi Ir Pro Sc Software 21




The first step to use the Achi Ir Pro Sc software 21 is to install it on your PC or laptop. You will need an RS232 port or an RS232 to USB converter to connect your station to your computer. You will also need to download the software from the official website or from this link: [ToolBoom]


Once you have downloaded the software, follow these steps to install it:



  • Extract the zip file to a folder on your computer.



  • Run the setup.exe file as an administrator.



  • Follow the instructions on the screen and choose your preferred language and destination folder.



  • When the installation is complete, restart your computer.



  • Connect your Achi Ir Pro Sc station to your computer using the RS232 cable or converter.



  • Launch the Achi Ir Pro Sc software 21 from your desktop or start menu. The software will automatically detect your station and show its serial number and firmware version.




You are now ready to use the software.


How to Use Achi Ir Pro Sc Software 21




The Achi Ir Pro Sc software 21 has a user-friendly interface that allows you to control and monitor your station easily. The main window of the software has four tabs: Profile, Manual, Graph, and Settings. Let's take a look at each tab and what they do.


Profile Tab




The profile tab is where you can create, edit, save, load, and delete profiles for different soldering tasks. A profile is a set of parameters that define how the upper and lower heaters will operate during a soldering process. You can set the following parameters for each profile:



  • Name: The name of the profile.



  • Upper Temperature: The target temperature of the upper heater in degrees Celsius.



  • Upper Time: The duration of the upper heater in seconds.



  • Lower Temperature: The target temperature of the lower heater in degrees Celsius.



  • Lower Time: The duration of the lower heater in seconds.



  • Ramp Rate: The speed of temperature increase or decrease in degrees Celsius per second.



  • Cooling Time: The duration of cooling after soldering in seconds.



  • Buzzer: The option to enable or disable the buzzer sound when soldering is finished.




You can create a new profile by clicking on the New button and entering the parameters in the boxes below. You can edit an existing profile by selecting it from the list and modifying the parameters. You can save a profile by clicking on the Save button and choosing a file name and location. You can load a profile by clicking on the Load button and browsing for a file. You can delete a profile by selecting it from the list and clicking on the Delete button.


Manual Tab




The manual tab is where you can manually control the upper and lower heaters without using a profile. You can set the temperature and time for each heater by entering the values in the boxes below. You can start or stop the heaters by clicking on the Start or Stop buttons. You can also adjust the temperature and time during the soldering process by using the arrows or typing new values.


Graph Tab




The graph tab is where you can view the real-time temperature curve of the upper and lower heaters during the soldering process. You can also view the target temperature curve of the profile you are using. The graph shows the temperature in degrees Celsius on the vertical axis and the time in seconds on the horizontal axis. You can zoom in or out of the graph by using the mouse wheel or the buttons below. You can also save the graph as an image file by clicking on the Save button.


Settings Tab




The settings tab is where you can configure some general options for the software and the station. You can set the following options:



  • Language: The language of the software interface. You can choose from English, Chinese, Russian, Spanish, Portuguese, French, German, Italian, Turkish, Arabic, and Persian.



  • COM Port: The communication port that connects your station to your computer. You can choose from COM1 to COM9.



  • Baud Rate: The speed of data transmission between your station and your computer. You can choose from 9600, 19200, 38400, 57600, or 115200 bits per second.



  • Temperature Unit: The unit of temperature measurement for the software and the station. You can choose from Celsius or Fahrenheit.



  • Temperature Correction: The option to calibrate the temperature sensors of the upper and lower heaters. You can enter a positive or negative value in degrees Celsius to adjust the temperature reading.



  • Restore Default: The option to reset all the settings to their default values.




You can apply the settings by clicking on the Apply button. You can also test the connection between your station and your computer by clicking on the Test button.


Tips and Tricks for Using Achi Ir Pro Sc Software 21




Here are some tips and tricks to help you use the Achi Ir Pro Sc software 21 more effectively and efficiently:



  • Before soldering, make sure that your station is properly installed and connected to your computer. Also make sure that your board is securely fixed on the PCB table and aligned with the upper heater.



  • Use a suitable profile for your soldering task. You can create your own profiles based on your experience and preference, or you can use some of the preloaded profiles that come with the software. You can also find some profiles online from other users or experts.



  • Monitor the temperature curve of your heaters during soldering. Make sure that they follow the target curve of your profile and that they do not exceed or fall below the safe range. If you notice any abnormality, stop soldering immediately and check for any problems.



  • Cool down your board properly after soldering. Do not touch or move your board until it reaches room temperature. This will prevent any damage or deformation caused by thermal shock.



  • Clean and maintain your station regularly. Remove any dust or dirt from your heaters and sensors. Replace any worn or damaged parts. Keep your station away from moisture and extreme temperatures.




Conclusion




The Achi Ir Pro Sc software 21 is a powerful tool that enhances your infrared soldering experience. It allows you to create and manage profiles, control and monitor heaters, view and save graphs, and configure settings for your station. By following this guide, you will be able to use the software with ease and confidence.


If you have any questions or feedback about this article, please leave a comment below. If you want to learn more about infrared soldering or buy an Achi Ir Pro Sc station, please visit [ToolBoom], a reliable online store that offers high-quality tools and equipment for electronics repair.


About

Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page